25_3a252_3a2522_3a25222_3a25222
Media Manager
Namespaces
Choose namespace
Media Files
Files in 15:153
- acceptable-shrinkage-cavities.svg
- 2021/07/05 12:31
- 174.1 KB
- allowable-weak-points-of-forged-parts.svg
- 2021/07/05 12:31
- 12.9 KB
- design-influencing-finishing.svg
- 2021/07/05 12:31
- 4.4 KB
- forging-process-modeling.svg
- 2021/07/05 12:31
- 20.7 KB
- hip-of-cast-parts.svg
- 2021/07/05 12:31
- 12.1 KB
- minimizing-finishing-problems-by-documentation.svg
- 2021/07/05 12:31
- 322.3 KB
- prevention-od-deformation-during-heat-treatment.svg
- 2021/07/05 12:31
- 89.8 KB
- prevention-of-heat-treatment-cracking.svg
- 2021/07/05 12:31
- 36 KB
- properties-of-cast-parts-influenced-by-hip.svg
- 2021/07/05 12:31
- 12.5 KB
- remedies-for-problems-of-blanks.svg
- 2022/05/16 16:53
- 60.8 KB
- repair-of-flaws-in-cast-parts.svg
- 2021/07/05 12:31
- 20 KB
- segregation-distributions-in-billets.svg
- 2021/07/05 12:31
- 47.6 KB
- segregation-in-forged-disk.svg
- 2021/07/05 12:31
- 4.9 KB
- segregations-influenced-by-melting-temperature.svg
- 2021/07/05 12:31
- 12.2 KB
- straightening-of-cast-parts.svg
- 2021/07/05 12:31
- 10 KB
- terms-of-part-production-stages.svg
- 2021/07/05 12:31
- 94.6 KB
- thermal-stresses-and-flaws-in-cast-parts.svg
- 2021/07/05 12:31
- 20.2 KB
- tolerating-cracks-in-ni-cast-parts.svg
- 2021/07/05 12:31
- 33.3 KB
- weak-points-considered-in-design-phase.svg
- 2021/07/05 12:31
- 11 KB
File
- View
- History
- Date:
- 2022/02/20 16:52
- Filename:
- influence-of-shrink-fitting-with-spline-toothing-2.svg
- Size:
- 22KB
© 2024 ITTM & Axel Rossmann